Ornamental Aeration & Fountains
Splash 1/2001
The SPLASH 1/2001 is a surface-mounted aerator which oxygenates and destratifies by drawing water through a central column and dispersing a plume of water skyward. The twin-propeller design allows for dispersal of water both vertically and radially, enabling a greater volume of water to be dispersed into free air, facilitating a more efficient transfer of oxygen to water.
Positioning is carried out by tethering from each of the unit’s four corners to static points on a lagoon bank.
Component Construction:
Motor Housing – Marine Brass
Propellers – Reinforced Plastic
The unit is supplied with a 20-metre length of marine-grade submersible electrical cable – (further length can be added on request, prior to unit dispatch, as appropriate).
Acqua & Co. SPLASH 1/2001 – Technical Specifications | |||||
Supply Requirement (V) |
Rated Power (HP) |
Rated Power (kW) |
Rated Current (A) |
Flow Capacity (Lpm) |
0²Transfer Rate (m³O²/Hr) 2.4 |
240 Single Phase | 1.0 | 0.75 | 4.5 | 3200 | 1.4 |
415 Three Phase | 1.0 | 0.75 | 2.0 | 3200 | 1.4 |
Maintenance Schedule
The Acqua & Co. SPLASH 1/2001 surface-mounted aerator is a high efficiency machine designed to allow continuous operation in outdoor ponds and lakes. Due to its short motor shaft design and effective sealing arrangement, the SPLASH 1/2001 has a low maintenance requirement.
However, it is important to provide effective preventative maintenance to ensure a long life from the aerator. It is recommended that an inspection of the primary seal is performed yearly, with inspection of the secondary seal and bearings performed every two years. It is recommended that the maintenance schedule provided be followed to ensure effective management of your asset.
Splash 1/2008
The SPLASH 1/2008 is a surface-mounted aerator which oxygenates and destratifies by drawing water through a central column and dispersing a plume of water skyward. The twin-propeller design allows for dispersal of water both vertically and radially, enabling a greater volume of water to be dispersed into free air, facilitating a more efficient transfer of oxygen to water.
Positioning is carried out by tethering from each of the unit’s four corners to static points on a lagoon bank.
Component Construction:
Motor Housing – Marine Brass
Propellers – Reinforced Plastic
The unit is supplied with a 20-metre length of marine-grade submersible electrical cable – (further length can be added on request, prior to unit dispatch, as appropriate).
Acqua & Co. SPLASH 1/2008 – Technical Specifications | ||||||
Supply Requirement (V) |
Rated Power (HP) |
Rated Power (kW) |
Rated Current (A) |
Flow Capacity (Lpm) |
Vertical Dispersion (m) |
Radial Dispersion (m) |
415 Three Phase | 1.5 | 1.2 | 2.5 | 3100 | 1.1 | 5.0 |
Maintenance Schedule
The Acqua & Co. SPLASH 1/2008 surface-mounted aerator is a high efficiency machine designed to allow continuous operation in outdoor ponds and lakes. Due to its short motor shaft design and effective sealing arrangement, the SPLASH 1/2008 has a low maintenance requirement.
However, it is important to provide effective preventative maintenance to ensure a long life from the aerator. It is recommended that an inspection of the primary seal is performed yearly, with inspection of the secondary seal and bearings performed every two years. It is recommended that the maintenance schedule provided be followed to ensure effective management of your asset.
Sprint 1.5
The SPRINT 1.5 is a surface-mounted aerator which oxygenates and destratifies by drawing water through a central column and dispersing a plume of water skyward. The propeller design allows for dispersal of water both vertically and radially, enabling a greater volume of water to be dispersed into free air, facilitating a more efficient transfer of oxygen to water. Positioning is carried out by tethering from each of the unit’s four corners to static points on a lagoon bank.
Component Construction:
Motor Housing – marine brass
Propellers – reinforced plastic
Acqua & Co. Sprint 1.5 – Technical Specifications | ||||||
Supply Requirement (V) |
Rated Power (HP) |
Rated Power (kW) |
Rated Current (A) |
Flow Capacity (Lpm) |
Vertical Dispersion(m) (m) |
Radial Dispersion (m) |
240 Single Phase | 1.5 | 1.1 | 5.0 | 1250 | 1.7 | 6.5 |
415 Three Phase | 1.5 | 1.2 | 2.0 | 1250 | 1.7 | 6.5 |
Maintenance Schedule
The Acqua & Co. Sprint 1.5 surface-mounted aerator is a high efficiency machine designed to allow continuous operation in outdoor ponds and lakes. Due to its short motor shaft design and effective sealing arrangement, the SPRINT 1.5 has a low maintenance requirement. However, it is important to provide effective preventative maintenance to ensure a long life from the aerator. It is recommended that an inspection of the primary seal is performed yearly, with inspection of the secondary seal and bearings performed every two years. It is recommended that the maintenance schedule provided be followed, using only genuine Acqua & Co. spare parts, to ensure effective management of your asset.
Font N-Aire® Platinum™ by Air-O-Lator Range
The Font N-Aire® Platinum™ range of surface-mounted aerating and ornamental fountains oxygenate and destratify by drawing water through a central column and disperse a plume skyward.
A specialised unit design allows for selection from a range of water plumes, affording an enhanced aesthetic during operation.
The unit is supplied with a 20-metre length of marine-grade submersible electrical cable – (further length can be added on request, prior to unit dispatch, as appropriate).